3 Best Time Lapse Camera for Plants

Short answer: Which camera is best for plant time-lapse?

For long, set-and-forget plant time-lapses, the Brinno TLC2020 is the simplest dedicated option. It records Full HD with HDR, runs on four AA batteries and is rated at up to 82 days at a five-minute interval. The GoPro Hero 12 gives higher image quality but needs external power for long projects, and the PlantCam is an app-based option for indoor hobbyists. A DSLR such as the Canon EOS Rebel T7 can also work with an external intervalometer.

Affiliate note: This post has affiliate links. If you buy through them, the site may earn a small commission at no extra cost to you.

What matters for plant time-lapse?

• Battery life or external power. Plants grow for days or weeks, so the camera must keep running.
• Interval control. The interval sets how fast growth looks on screen.
• Stable position. The camera must not move between frames.
• Consistent exposure. Light changes cause flicker in the final video.
• Storage. Thousands of frames need a large memory card.

Best overall dedicated camera: Brinno TLC2020

The Brinno TLC2020 is a purpose-built time-lapse camera. Retailers list a 2 MP sensor recording Full HD with HDR, a 2-inch screen, microSD cards up to 128 GB and a body weight of about 97.5 g without batteries. Battery life is quoted at no less than 82 days at a five-minute interval in time-lapse mode, according to Photo Specialist's listing. It suits long projects, such as a seed growing for months, where reliability matters more than resolution.

Best for quality: GoPro Hero 12

The GoPro Hero 12 records high-resolution video and has a time-lapse mode. Its small battery does not last for weeks, so long plant projects need external USB power. It suits shorter projects, such as a flower opening over a day, where image quality matters.

Best for beginners: PlantCam

The PlantCam is built for indoor plant hobbyists and uses an app-based workflow, which makes setup simple. It suits people who want to start quickly without learning camera settings.

DSLR option: Canon EOS Rebel T7

The Canon EOS Rebel T7 takes sharp photos, and its image quality and low-light performance suit plant work. It has no built-in interval timer, so it needs an external intervalometer to fire the shutter automatically, which adds cost. See time-lapse interval and shoot length for how to set the interval.

DIY option: Raspberry Pi camera

A Raspberry Pi with a camera module can capture photos on a schedule, with full control over the interval and storage. It needs some technical skill to set up.

How do the options compare?

Tips for stunning plant time-lapses

• Fix the position. Use a sturdy tripod or a clamp so the camera cannot shift.
• Control the light. A grow light on a timer keeps exposure consistent. Avoid windows that change through the day.
• Choose the interval by growth speed. A seedling might use a 10 to 15 minute interval, while a fast bloom needs a shorter one. At 30 frames per second, 300 frames make a 10-second clip, so a 15-minute interval covers about three days.
• Lock exposure and focus. Manual settings reduce flicker.
• Add a marker. A ruler or a pot in frame gives scale.
• Check storage and power. Calculate frames per day and card size before starting.

For the editing side, see how to make a time-lapse video and why time-lapse looks jerky. More cameras are covered in the best video camera for time-lapse guide.

Frequently asked questions

How often should the camera take a photo? For slow-growing plants, every 10 to 30 minutes works. Faster events, such as a flower opening, need an interval of seconds to a few minutes.

How long should a plant time-lapse run? From a day for a bloom to months for a full life cycle. Plan power and storage for the whole period.

Do I need a special camera? No. Any camera that can take photos on a schedule works, but dedicated time-lapse cameras are simplest.

How can I stop flicker? Use constant lighting, manual exposure and, if needed, a de-flicker filter in editing software.